V type offset goble disc harrows are with hydraulic and trailed type machines which are used to dissect plant residues (corn, sunflower, wheat etc.) and weeds; to break the duff layer; for doubling and triplet in a field left for fallowing after plowing.

It prepares the field directly for planting by harrowless taming without using any other agricultural machine in dry seasons where ploughs can not enter after the harvest and it may be used to tame the soil including intensive humidity as well.

• Materials used in offset disc harrows are inspected completely before manufacturing step and prepared for manufacturing after passing along the test step and quality materials are used.
• Thanks to its design, the adjustments are simple and it is a very easy to operate machine.
• As well as boron steels with a diameter of 560 mm, European and domestic discs with diameter of 610 mm may be installed on our machines.
• Automated curving assembly has an operation feature on desired angle with spring lock system.
• Upon request, an curve adjusting assembly may be installed to adjust the curve without getting off the tractor.
• There are scrapers as sharp as the disc to clean the stuck soil on each disc during the operation.
• There is a discharge lubricator to visualize the discharge of the oil which is filled in the bearing together with the double seals and double bearings in our bearings.
• You may cultivate your field without loosing time and opening a furrow pit with the guide disc.
• Pulleys are manufactured from the steel and their breakage was prevented because of the stone or different reasons in the field.